The 2002 Honda Accord is a popular mid-size sedan that has been on the market for many years. It is known for its reliability and fuel efficiency, but like all vehicles, it can have its share of problems.
Some common issues that have been reported by owners of the 2002 Honda Accord include transmission issues, engine problems, and electrical issues. In this article, we will take a closer look at these problems and discuss some potential solutions.
It is important to note that every vehicle is different, and the specific problems you may encounter with your 2002 Honda Accord may vary. It is always best to consult with a mechanic or Honda dealership if you are experiencing any issues with your vehicle.
2002 Honda Accord Problems
1. “No Start” Due to Ignition Switch Failure
This is a problem that can occur if the ignition switch in the 2002 Honda Accord fails. The ignition switch is responsible for turning the engine on and off, and if it fails, the engine may not start. This can be a frustrating problem, as it can prevent you from using your vehicle.
Some possible causes of ignition switch failure include wear and tear, electrical issues, or physical damage. If you are experiencing this issue, it is important to have it repaired as soon as possible to avoid further problems.
2. Check Engine and D4 Lights Flashing
The check engine light is a warning light that appears on the dashboard of your vehicle when there is a problem with the engine or emissions system. The D4 light, also known as the transmission system light, indicates a problem with the transmission.
If both of these lights are flashing, it can indicate a serious problem with your vehicle that needs to be addressed. Some possible causes of this issue include faulty sensors, transmission problems, or engine issues. It is important to have this problem diagnosed and repaired by a mechanic as soon as possible.
3. Radio/Climate Control Display May Go Dark
This is a problem that can occur if the display on the radio or climate control system in the 2002 Honda Accord goes dark. This can make it difficult to use these features and can be frustrating for the driver.
Some possible causes of this issue include electrical problems, a faulty display, or a problem with the wiring. If you are experiencing this issue, it is important to have it repaired as soon as possible to restore full functionality to your vehicle.
4. Faulty Door Lock Actuator May Cause Power Door Locks to Activate Intermittently
The door lock actuator is a small motor that is responsible for locking and unlocking the doors of your vehicle. If the actuator becomes faulty, it can cause the power door locks to activate intermittently, which can be frustrating for the driver.
This problem can be caused by a variety of factors, including wear and tear, electrical issues, or physical damage. If you are experiencing this issue, it is important to have it repaired as soon as possible to restore full functionality to your vehicle.
5. Warped Front Brake Rotors May Cause Vibration When Braking
Brake rotors are an important part of the braking system on your vehicle. If they become warped, it can cause a vibration when braking, which can be dangerous and annoying.
This problem can be caused by a variety of factors, including excessive heat, improper braking techniques, or worn brake pads. If you are experiencing this issue, it is important to have it repaired as soon as possible to ensure the safety of your vehicle.
6. Air Conditioning Blowing Warm Air
If the air conditioning in your 2002 Honda Accord is blowing warm air, it can be uncomfortable and frustrating. This problem can be caused by a variety of factors, including a faulty compressor, low refrigerant levels, or a problem with the air conditioning system.
If you are experiencing this issue, it is important to have it repaired as soon as possible to restore full functionality to your vehicle.
7. Front Compliance Bushings May Crack
The front compliance bushings are a part of the suspension system on your vehicle that helps to absorb shock and improve ride comfort. If these bushings become cracked, it can cause problems with the handling and stability of your vehicle.
This problem can be caused by a variety of factors, including wear and tear, improper alignment, or physical damage. If you are experiencing this issue, it is important to have it repaired as soon as possible to ensure the safety and handling of your vehicle.
8. Porous Engine Block Casting May Cause Engine Oil Leaks
The engine block is the main component of the engine that houses the cylinders and other internal parts. If the engine block casting is porous, it can allow oil to leak out of the engine, which can cause a variety of problems.
This problem can be caused by a variety of factors, including poor manufacturing, excessive heat, or physical damage. If you are experiencing this issue, it is important to have it repaired as soon as possible to prevent further damage to your vehicle.
9. Driver’s Door Latch Assembly May Break Internally
The door latch assembly is responsible for keeping the door closed and allowing it to be opened. If the latch assembly on the driver’s door breaks internally, it can cause the door to become stuck and difficult to open.
This problem can be caused by a variety of factors, including wear and tear, physical damage, or improper use. If you are experiencing this issue, it is important to have it repaired as soon as possible to restore full functionality to your vehicle.
10. Bad Engine Mounts May Cause Vibration, Roughness, and Rattle
The engine mounts are responsible for securing the engine to the frame of the vehicle. If the engine mounts become worn or damaged, it can cause vibration, roughness, and rattle when driving.
This problem can be caused by a variety of factors, including wear and tear, improper installation, or physical damage. If you are experiencing this issue, it is important to have it repaired as soon as possible to improve the ride quality and stability of your vehicle.
11. Problems Shifting Into 3rd Gear
If you are experiencing difficulty shifting into 3rd gear in your 2002 Honda Accord, it can be frustrating and may indicate a problem with the transmission. This problem can be caused by a variety of factors, including worn gears, faulty sensors, or transmission fluid leaks.
If you are experiencing this issue, it is important to have it diagnosed and repaired by a mechanic as soon as possible to avoid further damage to your vehicle.
12. Bad Rear Hub/Bearing Unit
The rear hub and bearing unit is responsible for supporting the rear wheels of your vehicle and allowing them to rotate smoothly. If the unit becomes damaged or worn, it can cause problems with the handling and stability of your vehicle.
This problem can be caused by a variety of factors, including wear and tear, improper maintenance, or physical damage. If you are experiencing this issue, it is important to have it repaired as soon as possible to improve the safety and handling of your vehicle.
13. Clock Light May Burn Out
If the light that illuminates the clock in your 2002 Honda Accord burns out, it can make it difficult to see the time. This problem can be caused by a variety of factors,
including age, electrical issues, or physical damage. If you are experiencing this issue, it is important to have it repaired as soon as possible to restore full functionality to your vehicle.
14. Leaking Gaskets May Allow Water into Tail Light Assembly
The gaskets in your vehicle are responsible for sealing various parts and systems to prevent leaks. If the gaskets become damaged or worn, it can allow water to leak into the tail light assembly, which can cause problems with the lighting system.
This problem can be caused by a variety of factors, including wear and tear, improper maintenance, or physical damage. If you are experiencing this issue, it is important to have it repaired as soon as possible to prevent further damage to your vehicle.
15. Check Engine Light for Running Rough and Difficulty Starting
If the check engine light comes on in your 2002 Honda Accord and you are experiencing issues with the engine running rough or difficulty starting, it can indicate a serious problem with your vehicle.
This problem can be caused by a variety of factors, including faulty sensors, worn spark plugs, or issues with the fuel system. It is important to have this problem diagnosed and repaired by a mechanic as soon as possible to avoid further damage to your vehicle.
Possible Solution
| Problem | Possible Solution |
| “No Start” Due to Ignition Switch Failure | Replace the ignition switch. |
| Check Engine and D4 Lights Flashing | Have the issue diagnosed and repaired by a mechanic. This could involve replacing faulty sensors, repairing the transmission, or fixing engine issues. |
| Radio/Climate Control Display May Go Dark | Replace the display or repair any electrical issues or problems with the wiring. |
| Faulty Door Lock Actuator May Cause Power Door Locks to Activate Intermittently | Replace the door lock actuator. |
| Warped Front Brake Rotors May Cause Vibration When Braking | Replace the front brake rotors. This could also involve replacing worn brake pads or fixing any other issues with the braking system. |
| Air Conditioning Blowing Warm Air | Have the issue diagnosed and repaired by a mechanic. This could involve replacing the compressor, adding refrigerant, or fixing any other issues with the air conditioning system. |
| Front Compliance Bushings May Crack | Replace the front compliance bushings. |
| Porous Engine Block Casting May Cause Engine Oil Leaks | Repair or replace the engine block. |
| Driver’s Door Latch Assembly May Break Internally | Replace the door latch assembly. |
| Bad Engine Mounts May Cause Vibration, Roughness, and Rattle | Replace the engine mounts. |
| Problems Shifting Into 3rd Gear | Have the issue diagnosed and repaired by a mechanic. This could involve replacing worn gears, fixing faulty sensors, or addressing any other issues with the transmission. |
| Bad Rear Hub/Bearing Unit | Replace the rear hub and bearing unit. |
| Clock Light May Burn Out | Replace the clock light. |
| Leaking Gaskets May Allow Water into Tail Light Assembly | Replace the leaking gaskets. |
| Check Engine Light for Running Rough and Difficulty Starting | Have the issue diagnosed and repaired by a mechanic. This could involve replacing faulty sensors, fixing issues with the fuel system, or addressing any other problems with the engine. |
2002 Honda Accord Recalls
| Recall Number | Description | Date | Models Affected |
| 19V499000 | Newly Replaced Driver’s Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | Jul 1, 2019 | 10 models |
| 19V182000 | Driver’s Frontal Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | Mar 7, 2019 | 14 models |
| 15V320000 | Driver’s Front Air Bag Defective | May 28, 2015 | 10 models |
| 05V025000 | Honda Recalls 1997-2002 Due to Ignition Switch Interlock Failure | Jan 31, 2005 | 3 models |
| 02V226000 | Honda Recalls 2002-2003 Models Due to Misaligned Timing Belt Tensioner Pulley | Aug 28, 2002 | 6 models |
Recall 19V499000:
This recall affects certain 2002 Honda Accord models that were equipped with newly replaced driver’s air bag inflators. The issue is that the inflators may rupture during deployment, spraying metal fragments.
This can be dangerous, as the metal fragments can strike the driver or other occupants, potentially causing serious injury or death.
Recall 19V182000:
This recall affects certain 2002 Honda Accord models that were equipped with driver’s frontal air bag inflators. The issue is that the inflators may rupture during deployment, spraying metal fragments.
This can be dangerous, as the metal fragments can strike the driver, front seat passenger, or other occupants, potentially causing serious injury or death.
Recall 15V320000:
This recall affects certain 2002 Honda Accord models that were equipped with driver’s frontal air bags. The issue is that the air bags may be defective, and in the event of a crash requiring deployment, the inflator could rupture and spray metal fragments.
This can be dangerous, as the metal fragments can strike the driver or other occupants, potentially causing serious injury or death.
Recall 05V025000:
This recall affects certain 1997-2002 Honda Accord models that were equipped with ignition switch interlock failures. The issue is that if the driver does not shift to park before removing the key and fails to engage the parking brake, the vehicle could roll and a crash could occur.
Recall 02V226000:
This recall affects certain 2002-2003 Honda Accord models that were equipped with misaligned timing belt tensioner pulleys. The issue is that if the timing belt breaks, the engine will stall, increasing the risk of a crash.
Problems and Complaints Sources
https://repairpal.com/2002-honda-accord/problems
All Honda Accord years we talked –
Leave a Reply