The 2005 Honda CR-V is a compact SUV that was first introduced in 1995. It has been a popular choice for those looking for a reliable and practical vehicle with good fuel economy and off-road capabilities.
However, like any vehicle, the 2005 Honda CR-V is not immune to problems. Some common issues reported by owners include transmission problems, engine issues, and problems with the electrical system.
It is important for potential buyers to be aware of these potential issues before purchasing a 2005 Honda CR-V, and for current owners to be aware of potential issues that may arise with their vehicle.
It is always a good idea to regularly maintain and service your vehicle to help prevent or address any potential problems.
2005 Honda CR-V Problems
1. Air conditioning is blowing warm air
This is a common problem reported by owners of the 2005 Honda CR-V. It can be caused by a variety of issues, such as a faulty compressor, low refrigerant levels, or a malfunctioning thermostat.
If the air conditioning in your 2005 Honda CR-V is blowing warm air, it is important to have it diagnosed and repaired as soon as possible to ensure that it is functioning properly and providing you with the necessary cooling.
2. Door lock may be sticky and not work due to worn door lock tumblers
This issue can be caused by the door lock tumblers, which are small components that help to lock and unlock the doors, becoming worn over time.
If the door lock tumblers are not functioning properly, it can cause the door lock to be sticky and not work correctly. This issue can be resolved by replacing the worn door lock tumblers.
3. Groaning noise on turns due to differential fluid breakdown
The differential is a part of the drivetrain that helps to transfer power from the engine to the wheels. If the differential fluid breaks down, it can cause a groaning noise to occur when turning.
This issue can be caused by a variety of factors, such as a lack of proper maintenance or the use of the wrong type of fluid. It is important to have this issue diagnosed and repaired as soon as possible to ensure that the differential is functioning properly.
4. Harsh shift from first to second gear in automatic transmission
This issue can be caused by a variety of factors, such as a malfunctioning transmission control module, a faulty transmission valve body, or a problem with the transmission fluid.
If the transmission in your 2005 Honda CR-V is experiencing a harsh shift from first to second gear, it is important to have it diagnosed and repaired as soon as possible to ensure that it is functioning properly.
5. Warped front brake rotors may cause vibration when braking
The brake rotors are a crucial component of the braking system, and if they become warped, it can cause a vibration when braking. This issue can be caused by a variety of factors, such as improper braking techniques, using the wrong type of brake pads, or driving on rough or uneven surfaces.
If you are experiencing a vibration when braking in your 2005 Honda CR-V, it is important to have it checked out and repaired as soon as possible to ensure that the brakes are functioning properly.
6. Wipers won’t park due to windshield wiper motor failure
The windshield wiper motor is responsible for driving the wipers back and forth across the windshield. If the motor fails, it can cause the wipers to stop working or to not park correctly when turned off.
This issue can be caused by a variety of factors, such as a malfunctioning motor, a problem with the wiring, or a faulty wiper switch.
If your 2005 Honda CR-V’s wipers are not functioning properly, it is important to have them checked out and repaired as soon as possible to ensure that they are working correctly.
7. Tailgate light on dash may flicker
This issue can be caused by a variety of factors, such as a malfunctioning tailgate light, a problem with the wiring, or a faulty dashboard light.
If the tailgate light on your 2005 Honda CR-V’s dashboard is flickering, it is important to have it diagnosed and repaired as soon as possible to ensure that it is functioning properly.
8. Water leaking from the base of the windshield
This issue can be caused by a variety of factors, such as a problem with the windshield seals, a faulty windshield, or a malfunctioning drainage system.
If you are noticing water leaking from the base of the windshield in your 2005 Honda CR-V, it is important to have it diagnosed and repaired as soon as possible to prevent any further damage.
9. Check engine light on due to binding fuel cap
The check engine light is a warning system that indicates there is a problem with the vehicle’s engine or emission control system. One possible cause of the check engine light coming on in a 2005 Honda CR-V is a binding fuel cap.
This issue can be caused by the fuel cap not sealing properly, which can allow fuel to escape and trigger the check engine light. It is important to have this issue diagnosed and repaired as soon as possible to ensure that the engine is functioning properly.
10. Check engine light due to sticking intake manifold runner solenoid
The intake manifold runner solenoid is a small valve that controls the flow of air into the engine. If the solenoid becomes stuck, it can cause the check engine light to come on in your 2005 Honda CR-V.
This issue can be caused by a variety of factors, such as a malfunctioning solenoid, a problem with the wiring, or a faulty sensor. It is important to have this issue diagnosed and repaired as soon as possible to ensure that the engine is functioning properly.
11. Grinding noise from rear disc brakes due to corrosion of the caliper bracket
The caliper bracket is a component of the brake system that holds the brake caliper in place. If the caliper bracket becomes corroded, it can cause a grinding noise when the brakes are applied.
This issue can be caused by a variety of factors, such as a lack of proper maintenance or exposure to harsh weather conditions.
If you are experiencing a grinding noise from the rear disc brakes in your 2005 Honda CR-V, it is important to have it diagnosed and repaired as soon as possible to ensure that the brakes are functioning properly.
12. Rear trailing arm bushings crack/break and need replacement
The trailing arm bushings are a component of the suspension system that help to stabilize the rear wheels. If the bushings crack or break, it can cause problems with the handling and stability of the vehicle.
This issue can be caused by a variety of factors, such as a lack of proper maintenance or exposure to harsh weather conditions.
If the trailing arm bushings in your 2005 Honda CR-V are in need of replacement, it is important to have them replaced as soon as possible to ensure that the suspension is functioning properly.
13. Noise from water pump bearing
The water pump is a vital component of the cooling system, and if the bearing in the water pump fails, it can cause a noise to occur.
This issue can be caused by a variety of factors, such as a lack of proper maintenance or exposure to harsh weather conditions.
If you are experiencing a noise from the water pump bearing in your 2005 Honda CR-V, it is important to have it diagnosed and repaired as soon as possible to ensure that the cooling system is functioning properly.
14. Check engine light on due to faulty fuel tank pressure sensor
The fuel tank pressure sensor is a component that measures the pressure in the fuel tank and sends a signal to the engine control module. If the sensor is faulty, it can cause the check engine light to come on in your 2005 Honda CR-V.
This issue can be caused by a variety of factors, such as a malfunctioning sensor, a problem with the wiring, or a faulty fuel tank. It is important to have this issue diagnosed and repaired as soon as possible to ensure that the engine is functioning properly.
15. Check engine light due to defective throttle body
The throttle body is a component of the fuel system that controls the flow of air into the engine. If the throttle body becomes defective, it can cause the check engine light to come on in your 2005 Honda CR-V.
This issue can be caused by a variety of factors, such as a malfunctioning throttle body, a problem with the wiring, or a faulty sensor. It is important to have this issue diagnosed and repaired as soon as possible to ensure that the engine is functioning properly.
Possible Solution
| Problem | Possible Solution |
| Air conditioning is blowing warm air | Replace the faulty compressor, refill refrigerant, or replace the thermostat |
| Door lock may be sticky and not work due to worn door lock tumblers | Replace the worn door lock tumblers |
| Groaning noise on turns due to differential fluid breakdown | Replace the differential fluid, or repair or replace the differential if necessary |
| Harsh shift from first to second gear in automatic transmission | Repair or replace the transmission control module, transmission valve body, or transmission fluid |
| Warped front brake rotors may cause vibration when braking | Replace the warped brake rotors, or repair or replace the braking system as necessary |
| Wipers won’t park due to windshield wiper motor failure | Replace the faulty windshield wiper motor, repair or replace the wiring, or replace the wiper switch |
| Tailgate light on dash may flicker | Repair or replace the tailgate light, repair or replace the wiring, or replace the dashboard light |
| Water leaking from the base of the windshield | Repair or replace the windshield seals, replace the faulty windshield, or repair the drainage system |
| Check engine light on due to binding fuel cap | Replace the binding fuel cap or repair the fuel system as necessary |
| Check engine light due to sticking intake manifold runner solenoid | Replace the stuck intake manifold runner solenoid, repair or replace the wiring, or replace the faulty sensor |
| Grinding noise from rear disc brakes due to corrosion of the caliper bracket | Replace the corroded caliper bracket, or repair or replace the braking system as necessary |
| Rear trailing arm bushings crack/break and need replacement | Replace the cracked or broken trailing arm bushings, or repair or replace the suspension system as necessary |
| Noise from water pump bearing | Replace the faulty water pump bearing, or repair or replace the water pump as necessary |
| Check engine light on due to faulty fuel tank pressure sensor | Replace the faulty fuel tank pressure sensor, repair or replace the wiring, or replace the faulty fuel tank |
| Check engine light due to defective throttle body | Replace the defective throttle body, repair or replace the wiring, or replace the faulty sensor |
2005 Honda CR-V Recalls
| Recall | Issue | Affected Models | Solution |
| 19V501000 | Newly Replaced Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | 10 models | Replace the faulty airbag inflator |
| 19V499000 | Newly Replaced Driver’s Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | 10 models | Replace the faulty airbag inflator |
| 19V182000 | Driver’s Frontal Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | 14 models | Replace the faulty airbag inflator |
| 18V268000 | Front Passenger Air Bag Inflator Potentially Installed Improperly During Replacement | 10 models | Replace the improperly installed airbag |
| 17V029000 | Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | 7 models | Replace the faulty airbag inflator |
| 16V344000 | Passenger Frontal Air Bag Inflator Ruptures On Deployment | 8 models | Replace the faulty airbag inflator |
| 15V320000 | Driver’s Front Air Bag Defective | 10 models | Replace the faulty airbag |
| 14V700000 | Front Airbag Inflator Module | 9 models | Replace the faulty airbag inflator |
| 14V353000 | Front Airbag Inflator Module | 9 models | Replace the faulty airbag inflator |
| 12V486000 | Driver’s Power Window Switch May Fail | 1 model | Replace the faulty power window switch |
| 04V526000 | Honda Recalls 2005 CR-V Models Due to Passenger Air Bag Issue | 1 model | Repair or replace the faulty airbag |
| 20V768000 | Driver’s Power Window Switch Melts And Fails Causing Fire Hazard | 1 model | Replace the faulty power window switch |
Recall 19V501000:
This recall affects certain 2005 Honda CR-V models that were fitted with a newly replaced passenger air bag inflator. The inflator may rupture during deployment,
spraying metal fragments and posing a risk of injury or death to the vehicle occupants. The solution for this recall is to replace the faulty air bag inflator.
Recall 19V499000:
This recall affects certain 2005 Honda CR-V models that were fitted with a newly replaced driver’s air bag inflator.
The inflator may rupture during deployment, spraying metal fragments and posing a risk of injury or death to the vehicle occupants. The solution for this recall is to replace the faulty air bag inflator.
Recall 19V182000:
This recall affects certain 2005 Honda CR-V models that were fitted with a driver’s frontal air bag inflator. The inflator may rupture during deployment, spraying metal fragments and posing a risk of injury or death to the vehicle occupants.
The solution for this recall is to replace the faulty air bag inflator.
Recall 18V268000:
This recall affects certain 2005 Honda CR-V models that had their front passenger air bag inflator potentially installed improperly during replacement.
An incorrectly installed air bag may deploy improperly in the event of a crash, increasing the risk of injury to the vehicle occupants. The solution for this recall is to replace the improperly installed air bag.
Recall 17V029000:
This recall
Problems and Complaints Sources
https://repairpal.com/2005-honda-cr-v/problems
https://www.carcomplaints.com/Honda/CR-V/2005/
All Honda CR-V years we talked –
Leave a Reply