The Honda Fit, also known as the Honda Jazz in some markets, is a compact hatchback car that was first introduced in 2001. The 2008 model year of the Honda Fit was the second generation of the car, and it was available with a variety of engine options and trim levels.
As with any vehicle, the 2008 Honda Fit may have experienced some problems or issues during its production and use. In this introduction, we will briefly discuss some of the potential problems that have been reported by owners or identified by Honda.
It’s important to note that not all 2008 Honda Fits will have experienced these issues, and it’s always a good idea to do your own research and consult with a mechanic if you have concerns about the reliability of a specific vehicle.
2008 Honda Fit Problems
1. Check Engine Light and Stuttering While Driving
This problem has been reported by a significant number of 2008 Honda Fit owners. The check engine light is a warning system that indicates there is an issue with the car’s engine or emission control system.
If the check engine light is illuminated on the dashboard, it’s important to have the car checked by a mechanic as soon as possible to determine the cause of the problem. In some cases, the check engine light may be accompanied by stuttering or hesitation while driving,
which can be caused by a variety of issues such as a faulty spark plug or ignition coil, a clogged fuel filter, or a malfunctioning sensor.
2. Front Door Arm Rest May Break
Some 2008 Honda Fit owners have reported that the arm rest on the front doors of their cars may break or become damaged. The arm rest is a small shelf-like surface located on the inside of the door that provides a place for the driver or passenger to rest their arm while driving.
If the arm rest breaks or becomes damaged, it may be uncomfortable or inconvenient to use, and it may also reduce the overall appearance of the car.
3. Rear Washer Nozzle Broken or Missing
A few 2008 Honda Fit owners have reported that the rear washer nozzle, which is responsible for spraying water onto the rear window to help clean it, may be broken or missing.
This can make it difficult or impossible to properly clean the rear window, which can reduce visibility while driving. In some cases, the nozzle may simply be clogged and need to be cleaned or replaced, but in other cases, it may be necessary to replace the entire rear washer system.
Possible Solutions
2008 Honda Fit Problems | Possible Solutions |
Check Engine Light and Stuttering While Driving | Have the car checked by a mechanic to diagnose and repair the issue. Possible causes could include a faulty spark plug or ignition coil, a clogged fuel filter, or a malfunctioning sensor. |
Front Door Arm Rest May Break | Replace the arm rest with a new one if it is broken or damaged. |
Rear Washer Nozzle Broken or Missing | If the nozzle is simply clogged, it may be possible to clean or replace it. If the entire rear washer system is damaged, it may be necessary to replace it. |
2008 Honda Fit Recalls
Recall Type | Recall Description | Recall Date | Models Affected |
Body, Interior & Misc. | Newly Replaced Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | Jul 1, 2019 | 10 models |
Body, Interior & Misc. | Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | Jan 13, 2017 | 7 models |
Body, Interior & Misc. | Passenger Frontal Air Bag Inflator Ruptures On Deployment | May 24, 2016 | 8 models |
Body, Interior & Misc. | Incorrect Passenger Airbag Deployment | Dec 3, 2007 | 1 model |
Drive Train | Drive Shaft Fractures | Dec 11, 2020 | 3 models |
Electrical & Lights | Water Damage to Window Switch | Jun 26, 2013 | 1 model |
Electrical & Lights | Honda Recalls 2007-2008 Fit Vehicles Because Low Beam Headlights May Fail | Dec 16, 2010 | 1 model |
Electrical & Lights | Water Intrusion May Cause a Fire | Feb 2, 2010 | 1 model |
Recall 19V501000 (Body, Interior & Misc.):
This recall was issued in July 2019 for certain 2008 Honda Fit models due to a problem with the passenger air bag inflator. In some cases, the inflator may rupture during deployment, spraying metal fragments into the vehicle.
This can result in serious injury or death to the occupants of the car. Honda advised owners of affected vehicles to have the inflator replaced as soon as possible to address this issue.
Recall 17V029000 (Body, Interior & Misc.):
This recall was issued in January 2017 for certain 2008 Honda Fit models due to a problem with the passenger air bag inflator. In some cases, the inflator may rupture during deployment, spraying metal fragments into the vehicle.
This can result in serious injury or death to the occupants of the car. Honda advised owners of affected vehicles to have the inflator replaced as soon as possible to address this issue.
Recall 16V344000 (Body, Interior & Misc.):
This recall was issued in May 2016 for certain 2008 Honda Fit models due to a problem with the passenger frontal air bag inflator. In some cases, the inflator may rupture during deployment, spraying metal fragments into the vehicle.
This can result in serious injury or death to the occupants of the car. Honda advised owners of affected vehicles to have the inflator replaced as soon as possible to address this issue.
Recall 07V549000 (Body, Interior & Misc.):
This recall was issued in December 2007 for certain 2008 Honda Fit models due to a problem with the passenger air bag deployment. In some cases, the air bag may deploy incorrectly, increasing the risk of injury to small or out-of-position occupants.
Honda advised owners of affected vehicles to have the air bag system inspected and repaired as necessary to address this issue.
Recall 20V770000 (Drive Train):
This recall was issued in December 2020 for certain 2008 Honda Fit models due to a problem with the drive shaft. In some cases, the drive shaft may fracture, causing a sudden loss of drive power.
The vehicle may also roll away if the parking brake has not been applied before the vehicle has been exited. Either condition can increase the risk of a crash or injury. Honda advised owners of affected vehicles to have the drive shaft inspected and replaced as necessary to address this issue.
Recall 13V260000 (Electrical & Lights):
This recall was issued in June 2013 for certain 2008 Honda Fit models due to a problem with the window switch. In some cases, water may enter the switch and cause it to overheat,
potentially resulting in smoke, melting, or even a fire. Honda advised owners of affected vehicles to have the switch inspected and replaced as necessary to address this issue.
Recall 10V624000 (Electrical & Lights):
This recall was issued in December 2010 for certain 2008 Honda Fit models due to a problem with the low beam headlights. In some cases, the low beam headlights may fail, reducing the driver’s visibility as well as the vehicle’s visibility to other drivers and increasing the risk of a crash.
Honda advised owners of affected vehicles to have the headlights inspected and repaired as necessary to address this issue.
Recall 10V033000 (Electrical & Lights):
This recall was issued in February 2010 for certain 2008 Honda Fit models due to a problem with the window switch. In some cases, water may enter the switch and cause it to overheat, potentially resulting in smoke, melting, or even a fire. Honda advised owners of affected vehicles to have the switch inspected and replaced as necessary to address this issue.
Problems and Complaints Sources
https://repairpal.com/2008-honda-fit/problems
https://www.carcomplaints.com/Honda/Fit/2008/
All Honda Fit years we talked –
Leave a Reply