The 2011 Honda CR-V is a compact crossover SUV that was introduced in 1997 and has been a popular choice for drivers looking for a reliable and practical vehicle. While the CR-V generally has a good reputation for dependability,
some owners have reported experiencing problems with their 2011 model. Some common issues that have been reported include transmission problems, problems with the fuel system, and issues with the electrical system.
It’s worth noting that not all 2011 CR-V models will necessarily experience these problems, and some owners may have had a completely trouble-free ownership experience.
However, it’s important for potential buyers to be aware of these potential issues so they can make an informed decision about purchasing a 2011 Honda CR-V.
2011 Honda CR-V Problems
1. Air conditioning is blowing warm air
This problem can be caused by a variety of issues, such as a malfunctioning compressor, a low refrigerant level, or a problem with the air conditioning system’s control unit.
If the air conditioning in your 2011 Honda CR-V is blowing warm air, it’s important to have it checked out by a mechanic as soon as possible to determine the cause and get it repaired.
2. Groaning noise on turns due to differential fluid breakdown
The differential is a component of the vehicle’s drivetrain that allows the wheels to turn at different speeds, which is necessary when making turns. If the differential fluid breaks down, it can cause a groaning noise to occur when making turns.
This problem can be caused by a variety of factors, such as a lack of maintenance or a malfunctioning component, and it may require professional repair to fix.
3. Harsh shift from first to second gear in automatic transmission
This problem can be caused by a variety of issues with the transmission, such as a malfunctioning sensor or a problem with the transmission fluid.
If your 2011 Honda CR-V is experiencing harsh shifts between gears, it’s important to have it checked out by a mechanic as soon as possible to determine the cause and get it repaired.
4. Warped front brake rotors may cause vibration when braking
Brake rotors can become warped due to a variety of factors, such as driving aggressively or using the brakes heavily for an extended period of time. If the front brake rotors on your 2011 Honda CR-V are warped, it can cause a vibration when braking,
which can be uncomfortable and potentially dangerous. Warped brake rotors may need to be replaced in order to fix this problem.
5. Wipers won’t park due to windshield wiper motor failure
The windshield wiper motor is responsible for moving the wipers back and forth across the windshield. If the motor fails, the wipers may not be able to park properly, which can cause them to hang off the edge of the windshield or not return to their original position.
This problem can be caused by a variety of factors, such as a malfunctioning component or a lack of maintenance, and it may require professional repair to fix.
6. Check engine light on due to binding fuel cap
The check engine light (CEL) can be triggered by a variety of issues with the vehicle, including problems with the fuel system. If the fuel cap is not properly tightened or is damaged, it can cause the CEL to come on. In this case, the issue can usually be resolved by replacing the fuel cap or tightening it properly.
It’s important to have the issue diagnosed by a mechanic to ensure that the proper repair is made.
7. Grinding noise from rear disc brakes due to corrosion of the caliper bracket
The caliper bracket is a component of the disc brake system that holds the brake caliper in place. If the caliper bracket becomes corroded, it can cause a grinding noise to occur when the brakes are applied.
This problem can be caused by a variety of factors, such as exposure to salt or other corrosive substances, and it may require professional repair to fix.
8. Check engine light on due to faulty fuel tank pressure sensor
The fuel tank pressure sensor is responsible for monitoring the pressure inside the fuel tank. If the sensor is malfunctioning or damaged, it can cause the check engine light (CEL) to come on.
This problem can be caused by a variety of factors, including a faulty component or a problem with the fuel system, and it may require professional repair to fix.
9. Windshield washer inop due to front bumper impact
If the front bumper of your 2011 Honda CR-V has been impacted, it can cause damage to the windshield washer system.
This can result in the system becoming inoperable, which can make it difficult to clean the windshield effectively. This problem may require professional repair to fix.
10. AC evaporator may develop refrigerant leaks
The AC evaporator is a component of the air conditioning system that is responsible for removing heat from the cabin of the vehicle. If the evaporator develops a leak, it can cause the refrigerant level to drop, which can cause the air conditioning to blow warm air.
This problem can be caused by a variety of factors, such as a malfunctioning component or a problem with the refrigerant system, and it may require professional repair to fix.
Possible Solutions
| Problem | Possible Solutions |
| Air conditioning is blowing warm air | Check and replace the compressor, check and refill the refrigerant level, check and replace the control unit |
| Groaning noise on turns due to differential fluid breakdown | Check and replace the differential fluid, check and replace the differential gears or bearings |
| Harsh shift from first to second gear in automatic transmission | Check and replace the transmission fluid, check and replace the transmission sensors |
| Warped front brake rotors causing vibration when braking | Check and replace the front brake rotors |
| Wipers won’t park due to windshield wiper motor failure | Check and replace the windshield wiper motor |
| Check engine light on due to binding fuel cap | Tighten or replace the fuel cap |
| Grinding noise from rear disc brakes due to corrosion of the caliper bracket | Check and replace the caliper bracket |
| Check engine light on due to faulty fuel tank pressure sensor | Check and replace the fuel tank pressure sensor |
| Windshield washer inop due to front bumper impact | Check and repair the front bumper and windshield washer system |
| AC evaporator developing refrigerant leaks | Check and replace the AC evaporator, check and refill the refrigerant level |
2011 Honda CR-V Recalls
| Recall Number | Problem | Affected Models |
| 19V500000 | Newly Replaced Driver’s Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | 10 models |
| 19V502000 | Newly Replaced Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | 10 models |
| 19V378000 | Replacement Passenger Frontal Air Bag Inflator Improperly Installed During Previous Recall | 10 models |
| 19V182000 | Driver’s Frontal Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | 14 models |
| 18V661000 | Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | 9 models |
| 18V268000 | Front Passenger Air Bag Inflator Potentially Installed Improperly During Replacement | 10 models |
| 18V042000 | Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | 9 models |
| 17V545000 | Replacement Air Bag Inflator For Previous Recall May Have Been Improperly Installed | 8 models |
| 17V417000 | Passenger Frontal Air Bag Inflators Previously Replaced Have Incorrect Wiring Harness | 1 model |
| 17V030000 | Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments | 9 models |
| 16V346000 | Passenger Frontal Air Bag Inflator Ruptures On Deployment | 9 models |
| 16V061000 | Driver’s Frontal Air Bag Inflator Ruptures And Sprays Metal Fragments | 10 models |
19V500000:
This recall affects certain 2011 Honda CR-V models that were fitted with a driver’s air bag inflator that was replaced during a previous recall. The problem is that the newly replaced inflator may rupture during deployment, spraying metal fragments. This can cause serious injury or death to the driver or other occupants of the vehicle.
19V502000:
This recall affects certain 2011 Honda CR-V models that were fitted with a passenger air bag inflator that was replaced during a previous recall. The problem is that the newly replaced inflator may rupture during deployment, spraying metal fragments.
This can cause serious injury or death to the driver or other occupants of the vehicle.
19V378000:
This recall affects certain 2011 Honda CR-V models that had a passenger frontal air bag inflator replaced during a previous recall.
The problem is that the inflator may have been improperly installed during the replacement, which could cause it to not properly deploy in the event of a crash. This can increase the risk of injury to the passenger.
19V182000:
This recall affects certain 2011 Honda CR-V models that were fitted with a driver’s frontal air bag. The problem is that the inflator within the air bag module may rupture during deployment, spraying metal fragments. This can cause serious injury or death to the driver or other occupants of the vehicle.
18V661000:
This recall affects certain 2011 Honda CR-V models that were fitted with a passenger air bag. The problem is that the inflator within the air bag may rupture during deployment, spraying metal fragments. This can cause serious injury or death to the driver or other occupants of the vehicle.
18V268000:
This recall affects certain 2011 Honda CR-V models that had a front passenger air bag inflator replaced. The problem is that the inflator may have been improperly installed during the replacement, which could cause it to not properly deploy in the event of a crash. This can increase the risk of injury to the passenger.
18V042000:
This recall affects certain 2011 Honda CR-V models that were fitted with a passenger air bag. The problem is that the inflator within the air bag may rupture during deployment, spraying metal fragments. This can cause serious injury or death to the driver or other occupants of the vehicle.
17V545000:
This recall affects certain 2011 Honda CR-V models that had an air bag inflator replaced during a previous recall. The problem is that the replacement inflator may have been improperly installed,
which could cause it to not properly deploy in the event of a crash. This can increase the risk of injury to the passenger.
17V417000:
This recall affects a single 2011 Honda CR-V model that was fitted with passenger frontal air bag inflators that were previously replaced. The problem is that the inflators have an incorrect wiring harness,
which could cause the air bag to not deploy as intended in the event of a crash. This can increase the risk of injury to the passenger.
17V030000:
This recall affects certain 2011 Honda CR-V models that were fitted with a passenger air bag. The problem is that the inflator within the air bag may rupture during deployment, spraying metal fragments. This can cause serious injury or death to the driver or other occupants of the vehicle.
16V346000:
This recall affects certain 2011 Honda CR-V models that were fitted with a passenger frontal air bag. The problem is that the inflator within the air bag may rupture during deployment, spraying metal fragments. This can cause serious injury or death to the driver or other occupants of the
Problems and Complaints Sources
https://repairpal.com/2011-honda-cr-v/problems
https://www.carcomplaints.com/Honda/CR-V/2011/
All Honda CR-V years we talked –
Leave a Reply