Can You Replace The Honda Accord Emblem On A Steering Wheel?

If I were you, I would avoid having the Emblem on your steering wheel replaced. Many people have attempted it, and it wasn’t worth the effort.

The airbag is held in place by rods that run through the airbag cover and stretch on the other side to keep it in place. There is only one way around it: swapping the airbag.

It’s attached to the airbag cover at 12 or 14 places. You can purchase overlays placed over the existing Emblem on the airbag cover.

Can You Replace The Honda Accord Emblem On A Steering Wheel?

If your Honda Accord steering wheel emblem is broken, deteriorated, or missing, it’s time to replace it. Someone with basic automotive repair skills can remove and replace the Emblem part in a few easy steps.

Ensure you have the correct replacement parts before starting – different models require different emblems. When replacing the Emblem, do not damage any other steering wheel components.

Keep your car looking new and in top condition with quality replacement parts from our site.

Once those are removed, use a Phillips head screwdriver to pry off the metal backing plate – it should just peel away with some gentle force (be careful not to tear it).

Next, reach behind and pop off the decorative piece that holds on the light-up logo – this can be tricky since it’s held in by two small clips on either end.

Honda Accord Steering Wheel Emblem

Honda Accord steering wheel emblems are essential to your car’s design and appearance. Replacing the Emblem on your Honda Accord can be relatively easy if you know how to do it.

The process starts by removing the screws that secure the Emblem to the steering wheel hub. After removing the old Emblem, you can replace it with a new one using either original or aftermarket parts.

Be sure to consult with a mechanic beforehand so you don’t damage your car or yourself.

Replacement Parts for the Honda Accord Steering Wheel Emblem

Honda has many replacement parts for the Accord, so you can quickly fix any problems. If your steering wheel emblem is scratched or missing, replace it with a new part immediately- there are many to choose from.

You may also need to adjust the cable if it’s sticking out of the spokes on your wheel and doesn’t feel tight when you turn the wheel; this procedure is usually easy to do yourself.

When changing a tire, always make sure not to lose the screws or bolts that come with the spare tire installation kit- these small items can be complicated to locate later on.

Keep your Accord replacement parts in one place so you know where they are and don’t have to search for them when needed- keep them stored in a secure location like an Accord repair shop near you.

Removing and Replacing the Honda Accord Steering Wheel Emblem Part by Part

If you have a Honda Accord, the Emblem is likely affixed to the steering wheel using adhesive or screws.

The Emblem can be removed in parts by following these steps: remove the airbag cover, unscrew two screws at each end of the handlebar stem, and pull outwards on both sides of the Emblem to remove.

To replace the Emblem,

• First, locate which screw holds it in place – often, this is located near one end of the handlebar stem.
• Then unscrew that screw and lift out the old Emblem
• Next, measure around where you would like to put your new one. Emblem and cut a piece slightly larger than needed with scissors or a sharp knife, then re-attach with silicone adhesive or screws provided.
• Be careful not to overtighten as this could damage your steering wheel, while some models come with heated steering wheels.

To Recap

Replacing the Honda Accord emblem on a steering wheel is not difficult, but it does require some tools and skills. If you can access a drill, saws, sandpaper, and scissors, you can replace the Emblem yourself.

However, if you do not have these tools or want to save money by hiring a professional car emblem replacement service, check their prices before starting work.