2012 Honda Fit Problems

The 2012 Honda Fit is a compact car that was released in the United States in 2011. It is known for its fuel efficiency, versatility, and reliable performance. However, like any vehicle, the 2012 Honda Fit may experience problems over time.

Some common issues that have been reported by Honda Fit owners include transmission issues, engine problems, and issues with the electrical system.

It is important for Honda Fit owners to be aware of these potential problems and to have their vehicles regularly serviced to help prevent or address any issues that may arise.

Table of Contents

Here, the 2012 Honda Fit’s common problems are listed and explained.

1. Check Engine Light and Stuttering While Driving

This is a common problem reported by 2012 Honda Fit owners. The check engine light may come on due to a variety of issues, including problems with the engine, transmission, or other systems in the vehicle.

The stuttering or hesitating while driving may be caused by a variety of issues, including problems with the fuel system, ignition system, or transmission.

If the check engine light is on or the vehicle is stuttering while driving, it is important to have the issue diagnosed and repaired as soon as possible to prevent further damage to the vehicle.

2. The Fuel Filler Door May Not Open

Some 2012 Honda Fit owners have reported issues with the fuel filler door not opening properly. This can be caused by a variety of issues, including problems with the latch or hinges on the fuel filler door or issues with the fuel filler door mechanism.

If the fuel filler door is not opening properly, it can be frustrating and inconvenient for the vehicle owner. It is important to have the issue diagnosed and repaired to ensure that the fuel filler door is functioning properly.

Possible Solutions

2012 Honda Fit Problems	Possible Solutions
Check Engine Light and Stuttering While Driving	Have the vehicle’s computer system scanned for diagnostic codes to identify the cause of the problem. Repair or replace any faulty parts as needed.
Fuel Filler Door May Not Open	Check the latch and hinges on the fuel filler door for wear or damage. Clean or lubricate as needed. If the problem persists, the fuel filler door mechanism may need to be repaired or replaced.
Transmission Issues	Have the transmission system checked for any problems, such as low fluid levels or faulty parts. Repair or replace any faulty parts as needed.
Engine Problems	Check the engine for any problems, such as low oil levels or faulty parts. Repair or replace any faulty parts as needed.
Electrical System Issues	Check the electrical system for any problems, such as faulty wiring or malfunctioning components. Repair or replace any faulty parts as needed.
Suspension Issues	Check the suspension system for any problems, such as worn or damaged components. Repair or replace any faulty parts as needed.
Excessive Oil Consumption	Have the engine checked for any problems, such as worn or damaged components. Repair or replace any faulty parts as needed. Ensure that the vehicle is using the correct type and amount of oil.
Noise From the Transmission	Have the transmission system checked for any problems, such as low fluid levels or faulty parts. Repair or replace any faulty parts as needed.

2012 Honda Fit Recalls

Recall	Description	Affected Models	Date Issued
19V500000	Newly Replaced Driver’s Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments	10 models	Jul 1, 2019
19V502000	Newly Replaced Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments	10 models	Jul 1, 2019
19V378000	Replacement Passenger Frontal Air Bag Inflator Improperly Installed During Previous Recall	10 models	May 17, 2019
18V661000	Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments	9 models	Sep 28, 2018
18V268000	Front Passenger Air Bag Inflator Potentially Installed Improperly During Replacement	10 models	May 1, 2018
18V042000	Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments	9 models	Jan 16, 2018
17V545000	Replacement Air Bag Inflator For Previous Recall May Have Been Improperly Installed	8 models	Sep 6, 2017
17V030000	Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments	9 models	Jan 13, 2017
16V061000	Driver’s Frontal Air Bag Inflator Ruptures And Sprays Metal Fragments	10 models	Feb 3, 2016
13V157000	Updated Software Available for ESC Module	1 model	Apr 24, 2013
20V770000	Drive Shaft Fractures	3 models	Dec 11, 2020

19V500000 –

Newly Replaced Driver’s Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments: This recall was issued due to a problem with the driver’s airbag inflator.

In some cases, the inflator may rupture during deployment, spraying metal fragments into the vehicle. This can be dangerous and potentially cause serious injury or death to the driver or other occupants.

19V502000 –

Newly Replaced Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments: This recall was also issued due to a problem with the passenger airbag inflator.

19V378000 –

Replacement Passenger Frontal Air Bag Inflator Improperly Installed During Previous Recall: This recall was issued due to a problem with the passenger frontal air bag inflator that was improperly installed during a previous recall. In the event of a crash, the airbag may not deploy properly, increasing the risk of injury to the passenger.

18V661000 –

Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments: This recall was issued due to a problem with the passenger airbag inflator. In some cases, the inflator may rupture during deployment, spraying metal fragments into the vehicle.

This can be dangerous and potentially cause serious injury or death to the driver or other occupants.

18V268000 –

Front Passenger Airbag Inflator Potentially Installed Improperly During Replacement: This recall was issued due to a problem with the front passenger airbag inflator that may have been improperly installed during replacement.

In the event of a crash, the airbag may not deploy properly, increasing the risk of injury to the passenger.

18V042000 –

spraying metal fragments into the vehicle. This can be dangerous and potentially cause serious injury or death to the driver or other occupants.

17V545000 –

Replacement Air Bag Inflator For Previous Recall May Have Been Improperly Installed: This recall was issued due to a problem with the replacement air bag inflator for a previous recall.

In some cases, the inflator may have been improperly installed, which could cause the passenger frontal air bag to deploy improperly in the event of a crash. This could increase the risk of injury to the passenger.

17V030000 –

Passenger Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments: This recall was issued due to a problem with the passenger airbag inflator.

16V061000 –

Driver’s Frontal Air Bag Inflator Ruptures And Sprays Metal Fragments: This recall was issued due to a problem with the driver’s frontal air bag inflator.

13V157000 –

Updated Software Available for ESC Module: This recall was issued due to a problem with the electronic stability control (ESC) system. In some

Problems and Complaints Sources

https://repairpal.com/2012-honda-fit/problems

https://www.carcomplaints.com/Honda/Fit/2012/

All Honda Fit years we talked about –

2021	2016	2015	2014	2013
2011	2010	2009	2008	2007
2003

2012 Honda Fit Problems