If you’ve ever dealt with a car problem, you know how frustrating it can be to try and figure out what’s going on. But this doesn’t happen with Honda.
As its maintenance minder says it all. Let us explain the P0843 Honda code so that you don’t have to worry anymore upon seeing this code on your dashboard!
P0843 Honda error code refers to a transmission fluid pressure switch circuit malfunctioning. If the PCM detects an abnormal voltage reading from the switch, it will trigger the P0843 code.
In this article, we’ll explain what the P0843 Honda error code means and some of the most common causes of this problem.
Causes of P0843 Honda Error Code
Any problem with the transmission fluid pressure switch circuit typically causes the P0843 Honda error code to appear.
It monitors the pressure of the transmission fluid and sends a signal to the powertrain control module (PCM). It helps indicate whether the pressure is within the required range.
Some common causes for these issues include the following –
Faulty Transmission Fluid Pressure Switch
If the switch is not working properly, it may send incorrect signals to the PCM. These incorrect readings can cause the code to be triggered and continue to pop up until taken care of.
Transmission Control Module Issues
The transmission control module is responsible for controlling the transmission. There are possibilities that this module may sometimes malfunction, leading to the cause code being triggered.
Low Transmission Fluid Levels
Low transmission fluid levels can cause the pressure switch to send an incorrect reading to the PCM. This will result in the P0843 code appearing on your vehicle and may cause further damage to the car.
Malfunctioning Transmission
In some cases, the transmission itself may be the cause of the problem. This only means that the appearance of the P0843 code may be a symptom of a much larger issue.
Wiring Issues in the Transmission Fluid Pressure Switch Circuit
A damaged or corroded wire or a short circuit can also cause the code to be triggered. It is crucial to avoid such problems as they can lead to fatal accidents when ignored or not checked regularly.
It’s important to note that these are the most common causes of the P0843 Honda code but not an exhaustive list.
There may be other causes for this code to appear. However, the only way to be sure of the reason is to have the vehicle properly diagnosed by a professional mechanic.
Symptoms of P0843 Honda Code
The symptoms of a P0843 error code can vary depending on several factors, including the make and model of your car and its usage. However, some common signs include the following:
Transmission Not Shifting Properly
In case you ever experience the car failing to shift into gears at a time or even being delayed than usual can cause this code to pop up.
Although it may seem like a minor inconvenience, it can be rather dangerous for the car and the people in the vehicle.
Poor Acceleration
You may experience your vehicle struggling with acceleration or notice the car is incapable of driving faster. This is a sign you need to look out for, as it indicates that the code will appear sometime soon.
Check Engine Light
There is a valid reason why the check engine light exists on a vehicle. One of the reasons it exists is to help inform you that you need to take a thorough look at your vehicle. This light will illuminate itself when this code is to appear on the dashboard.
Reduced Fuel Efficiency
If the vehicle is not in use or has remained neglected, it may need help to speed up yet be consuming too much fuel. Therefore, even if the car is not in use as much, it could lead to reduced fuel efficiency and cause the code to appear.
No Movement
You may experience the P0843 code appearing on your dashboard due to several factors. One of these can be due to being stationary for an extended period of time. Therefore, leads to the car not moving at all.
How to Figure Out the Cause Behind the P0843 Code?
There are several ways to figure out the cause behind the P0843 code, including:
Transmission Fluid Level Adjustments
A low fluid level can cause the pressure switch to send an incorrect signal to the PCM, resulting in the P0843 code popping up. Therefore, it is important to check the fluid level and top it off as needed.
Inspect the Wiring and Connections
Damaged or corroded wiring, or a loose connection in the transmission fluid pressure switch circuit, can cause the code to be triggered. It is vital to remember that ignoring these issues can lead to fatal accidents.
Scan for Diagnostic Trouble Codes
You can retrieve the codes stored in the PCM using a diagnostic scanner. This will allow you to check for any relevant codes that may indicate the cause of the existing problems.
Check the Transmission Control Module
A malfunctioning or burnt-out transmission control module can cause the code to be triggered. Remember that any burnt-out car parts must be thoroughly checked to prevent accidents.
Inspect the Transmission Fluid Pressure Switch
If the switch is faulty, it may send incorrect signals to the PCM, triggering the code.
However, in order to specifically pinpoint the cause of the P0843 code pop-up, you must get it checked by a professional.
How to Fix the P0843 Error Code?
Fixing the P0843 error code might be a bit complicated as the issue is related to the transmission. However, if it is not checked and diagnosed correctly by a professional, it can lead to some dangerous consequences.
Although, some standard repair methods for this code include:
- Replacing the transmission fluid pressure switch
- Checking and replacing the wiring and connections
- Replacing or repairing the transmission control module
- Topping up or replacing the old transmission fluid with a good and healthy fluid
- Inspecting the PCM since it may be at fault and needs fixes or replacement
How to avoid the P0843 error code in the future?
No advice can guarantee the prevention of any error code. But following some tips will surely help. Some of these tips are as follows –
Regular maintenance
One of the best ways to avoid the P0843 error code is to maintain your vehicle regularly. This maintenance includes regular check-ups and transmission fluid changes.
Pay attention to symptoms
Pay attention to any unusual signs, such as gear not shifting properly, among others mentioned prior. This will help you to identify the problem early on and avoid costly repairs in the future.
Frequently Asked Questions
The cost to fix the P0843 error code can vary depending on the cause of the problem and the specific repair method required. However, diagnosing and repairing a P0843 error code can cost anywhere from $50 to $1,500.
This depends on the particular cause behind the code. But unfortunately, most fixes to this code require experienced assistance. So, if you aren’t skilled enough, the answer would be no.
Final Words
So, this was all about the P0843 Honda error code. We believe you are now completely familiar with all the causes, symptoms, and fixes involving this code.
Make sure to take action immediately whenever you notice any unusual phenomena with your car system.
We highly suggest everyone have their vehicles adequately diagnosed by a mechanic. This is because working on a transmission system can be complex and dangerous if not done correctly.
Leave a Reply