Honda Accord wipers come in a variety of sizes, but the sizes can change from year to year. It is important to verify the size of the Honda Accord wipers before purchasing them.
Although there are not many variations in the Honda Accord wiper size, it is important to be aware of them. If you need to replace your Honda Accord wipers, it is important to find the right size for your car.
It is also helpful to keep in mind the year of your Honda Accord when shopping for wipers.
What is Wiper Blade Size and Why it is Important?
The size of a wiper blade is important for two reasons. The first reason is that a large wiper blade can protect the windshield from extreme weather conditions. A large blade can also cover a wider area on the windshield, which means that it can clean it more effectively.
Measured in Millimeters or Inches
Wiper blade sizes are measured in millimeters or inches. This is because the length of the blade is important. A smaller blade will have a shorter length, which means that it will move more slowly across the windshield.
Range of Wiper Blades Available
There is a range of wiper blades available on the market, from small to large. This means that you can find a wiper blade that is perfect for your vehicle.
Refers to the Length of the Blade
Wiper blade size is measured in inches. This is because the length of the blade is important. A smaller blade will have a shorter length, which means that it will move more slowly across the windshield.
Points to Remember
Wiper blade size is important for two reasons: First, it can protect the windshield from extreme weather conditions. Second, the size of the blade can cover a wider area on the windshield, which means that it can clean it more effectively.
Wiper Blade Sizes by Side
Here’s a quick look at the Wiper Blade Sizes for the Honda Accord:
- For the Driver side, the sizes are 26″ and 24″
- For the Passenger side, the sizes are 18″-20″
- For the Front side, the size is 19″
- For the Rear side, the sizes are 14″-16″ and 19″
|26″ and 24″
|14″-16″ and 19″
Honda Accord Wiper Blade Sizes [All Years]
Generally, Honda Accord uses two sizes for the driver’s side, three sizes for the passenger side, one for the front side, and four sizes for the rear side.
- 2018-2022 trims use 26″ for the driver side and 16″ for the passenger side.
- 2008-2017 trims use 26″ for the driver side and 19″ for the passenger side.
- 2003-2007 trims use 26″ for the driver side and 18″ for the passenger side.
Here’s a quick look at the chart below!
|14″ or 15″
Can Faulty Wiper Blade Harm Windshield?
If your windshield wipers are not working properly, they can scratch and damage the glass surface on your windscreen quickly. Even if you only notice small scratches after a rainstorm or when it’s extremely hot outside, this can result in deep gouges over time.
You should replace your faulty wiper blades as soon as possible to avoid any long-term issues with the windshield glass itself.
It is also important to keep an eye on how often you use them and make sure that they are replaced every two years for optimum safety and protection of the vehicle window area.
If need be, professional windshield repair services may be necessary to fix existing damages before they become more serious or even require the replacement of the entire windshield unit altogether – which would necessitate a car rental during repairs.
How to Change Windshield Wiper Blades on Honda Accord
If you’re having trouble with your windshield wipers, it’s likely that the blades are worn out or need to be replaced. Follow these steps to change them:
1. Raise the wiper arm
The wiper arm is located on the front of the car near the windshield. You will need to raise the arm in order to remove the old blade.
2. Detach the blade from the arm
The blade can be detached from the arm by pressing a tab and sliding the old blade off of the arm.
3. Slide the new blade over the arm
The new blade should be slid over the arm and should click when it is secure.
4. Lower the wiper arm
The wiper arm is located on the front of the car near the windshield. You will need to lower the arm in order to install the new blade.
5. Repeat these steps
Once the wiper blades have been replaced, you will need to repeat these steps on the other wiper blade and on the rear wiper.
Whenever the blades get faulty or not working properly, changing the blades is necessary.
There are a few different Honda Accord wiper blade sizes, so it is important to know which one fits your car. The Honda Accord wiper blades come in two types, standard and high-performance, so make sure you get the right size for your vehicle.