The Honda CR-V is a popular compact SUV known for its reliability, comfort, and practicality. One of the advanced features of the CR-V is its Auto High Beam system, which automatically toggles between high and low beams depending on the ambient lighting and the presence of other vehicles on the road.
However, some CR-V owners have reported issues with their Auto High Beam system, including problems with the system not working correctly, malfunctioning, or turning off abruptly. This can cause discomfort and potential safety issues for other drivers on the road.
It’s important to note that resetting the software system by pulling the high beam stalk on the dash and holding it for 40 seconds may work in some cases, but it may not always be a permanent solution.
About Honda CRV Auto High Beam
The Honda CRV Auto High Beam is a feature that is designed to enhance your driving experience and improve safety when driving at night or in low-light conditions.
It works by using a camera mounted on the front windshield to detect the headlights of other vehicles and adjust the high beams automatically.
When the system is activated and there are no vehicles detected ahead of you, the high beams will automatically turn on and provide better visibility on the road. This can be particularly helpful when driving on unlit roads or in areas with poor visibility.
However, if the system detects the headlights of an oncoming vehicle or the taillights of a vehicle in front of you, it will automatically switch to low beams to avoid blinding the other driver. This can help to prevent accidents caused by temporary blindness or distraction from bright lights.
The auto high beam system is designed to improve safety and convenience by reducing the need for manual adjustments of the headlights while driving. It can provide better visibility and reduce the risk of accidents caused by poor visibility at night or in low-light conditions.
Common Causes Of The Honda CRV Auto High Beam Problem
There are a few common causes of the Honda CRV Auto High Beam Problem. Here are a few possibilities:
Faulty Sensor
One of the most common causes of the Honda CRV Auto High Beam Problem is a faulty sensor. The high beam system relies on a sensor to detect other vehicles on the road and adjust the headlights accordingly. If the sensor is malfunctioning, it may not be able to detect other vehicles and the high beams may stay on.
Electrical Issue
Electrical issues can also cause the Honda CRV Auto High Beam Problem. If there is a problem with the wiring or circuitry that controls the high beams, it may cause the system to malfunction and the high beams to stay on.
Software Issue
Another possible cause of the Honda CRV Auto High Beam Problem is a software issue. If there is a bug in the system’s programming, it may cause the high beams to stay on when they shouldn’t.
Fixes For The Honda CRV Auto High Beam Problem
There are several fixes for the Honda CRV Auto High Beam Problem. Here are a few solutions:
Replace The Sensor
If the sensor is faulty, it will need to be replaced. A qualified mechanic can diagnose the problem and replace the sensor as needed.
Check The Wiring And Circuitry
If there is an electrical issue causing the problem, it will need to be diagnosed and repaired by a qualified mechanic. They may need to check the wiring and circuitry to determine the cause of the issue.
Update The Software
If the problem is caused by a software issue, updating the system’s software may fix the problem. You can take your vehicle to a Honda dealership to have the software updated.
How To Use Honda CRV Auto High Beam?
Using the Honda CRV Auto High Beam is a simple process. Here are the steps to activate it:
- Make sure that the headlight lever is in the “Auto” position.
- Turn on the headlights by twisting the headlight knob on the right side of the dashboard.
- The auto high beam system will activate when you’re driving in low light conditions and the vehicle is traveling at speeds above 19 mph. The system will automatically detect when other vehicles are present and adjust the high beams accordingly.
- If the system detects that there are no other vehicles on the road, it will automatically turn on the high beams.
- If the system detects an oncoming vehicle or a vehicle ahead of you, it will automatically switch to low beams to avoid blinding the other driver.
- If you want to turn off the auto high beam system, you can simply push the headlight lever away from you to the “Off” position.
It’s important to note that the auto high beam system is designed to assist you with driving at night or in low light conditions.
However, it’s still your responsibility to pay attention to the road and adjust the high beams manually if needed to ensure that you’re driving safely and not blinding other drivers on the road.
Final Words
In conclusion, the Honda CRV Auto High Beam Problem can be caused by a few different factors, including a faulty sensor, electrical issues, and software bugs.
If you’re experiencing this problem with your Honda CRV, it’s important to have it diagnosed and repaired by a qualified mechanic to ensure that you’re driving safely on the road.
The photograph of the sensor and where t is shown as located looks much more like an exhaust gas oxygen sensor. It does not appear to be a light detector to me. And why not provide the Honda Part number? I assume it will be a commonly used part for most years. In my case, I’d be interested in the part for a 2017 CRV touring edition. Thank You.