The Honda Civic EM2 has been popular among drivers and vehicle enthusiasts. However, over time, the engine loses, and you may prefer a K-swap, where the original engine is replaced with a K-series one.
So, how much does it cost to K swap EM2? The cost to K swap an EM2 can vary widely depending on the parts and labor required, but a typical estimate would be between $3,500 and $5,000.
In this guide, we will guide you through the details of the cost required for the engine replacement. And we will also talk about several details about the topic. So, stay tuned till the end!
What Does It Mean To K-Swap EM2?
By K-swap EM2, we refer to the process of installing a K-series engine into a Honda Civic EM2. This process involves swapping the original engine for a K-series engine.
And this swapping takes place because the K-series engine is more powerful than the original. This process can significantly increase the power and performance of the Honda Civic EM2.
Different K-Series Engines and Their Price
Here, we have prepared a quick table to give you a clear idea about the different K-Series engines and their average cost.
|K-Series Engine||Average Price|
|K20A2||$2200 to $2500|
|K24A2||$2500 to $3000|
|K20Z3||$2000 to $2500|
|K24Z7||$2800 to $3200|
|K20C1||$3000 to $3500|
|K24W7||$3000 to $3500|
How Much Does K Swap Cost EM2?
As we mentioned earlier, the cost of swapping the primary engine with a new one depends on a wide range of factors. This includes the price of the engine, along with the components and the cost of labor.
Typically, the overall bill of the swapping comes out to be around $3500 to $7000. This total cost also includes the labor costs of installing the engine by a professional. However, the pricing will be significantly lower in case you can install the new engine on your own.
When Do You Have To K-Swap EM2?
The EM2 K-swap is quite a common procedure for Honda Civic owners. And there are two main reasons behind it. Let us take a look at the reasons why you should replace the engine.
Engine Not Performing Properly
The K-swap EM2 should be done when the engine is no longer running properly. If the engine does not work correctly, then you will encounter several issues on the roads. Not only that, but it can also result in accidents and injuries.
Upgrade The Engine
Over time, the engine loses its power due to wear and tear, accidents, leaks, and several other reasons. The performance of the vehicle reduces significantly in cases like these. Upgrading the engine by installing a K-series one increases vehicle power and efficiency.
How To Perform K-Swap EM2?
K-swapping an engine is not the easiest task. However, with proper guidance and tools, you can replace the engine in a few steps. Take a look at the steps on how to K-swap EM2.
Get the Required Components First
Purchase the necessary parts for a K-Swap. This includes:
- engine harness
- wiring adapter
- fuel lines
- Fuel pump
Step 1: Take The Original Engine Out
Remove the original engine properly by following the owner’s manual. Install the K-Series motor into the engine bay of the Civic. Make sure to mount and secure the motor properly.
Step 2: Put Transmission In Place
Install the transmission onto the K-Series motor. Make sure it is properly secured in place and lubricated. Connect the wiring adapter to the engine harness and the ECU.
Step 3: Connect the Fuel Pump and other Components
The next step is to install the fuel lines and fuel pump. After installation, ensure that you connect the injectors to the fuel rail. And connect the wiring adapter to the wiring harness and the ECU.
Step 4: Test The New Engine
Start the engine and check for any leaks or other issues. Lastly, take the car for a test drive to ensure that everything is working properly.
How much does it cost to k swap a Civic?
A k swap involves replacing the original engine with a newer and more powerful one from the K series of Honda engines.
The cost of a k swap can vary depending on several factors, such as the type and condition of the engine, the labor and parts required, and the compatibility of the engine with the car’s chassis and electronics.
A rough estimate of the cost of a k swap for a Civic is between $ 3,000 and $ 8,000, but it can be higher or lower depending on the specific details of the project.
How much is a k24 swap?
A k24 swap is a process of replacing the original engine of a car with a k24 engine, which is a 2.4-liter four-cylinder engine that offers more power and torque.
The cost of a k24 swap depends on several factors, such as the model and year of the car, the condition, and availability of the k24 engine, the labor and installation fees, and the additional modifications or upgrades that may be required.
According to some online sources, the average cost of a k24 swap ranges from $3,000 to $6,000, but it can vary depending on the specific circumstances and preferences of the car owner.
Conducting a K-swap on the Honda Civic EM2 is one of the top ways to improve the efficiency and performance of the vehicle. Now that you know how much it costs to K-swap EM2, we believe you can quickly get the engine replacement at a reasonable cost.
We have also mentioned the process in the guide above to help you if you want to avoid labor costs. However, ensure you have proper knowledge about the vehicle and its components before attempting the K-swap.