In the center of the rear deck, the factory-installed Honda premium sound system has a subwoofer.
Subwoofers built into factory Hondas are usually rated at about 50 Watts and when cranked up can rattle the plastics on the rear deck and C-pillar.
These factory systems will disappoint those accustomed to the fuller-sounding bass offered by a 10″ or 12″ subwoofer since the bass offered is barely audible.
Installing an amplifier and subwoofer requires unplugging the noise cancellation system, which is located behind the glove box and above the cabin air filter.
If not, the speakers will emit strange sounds to compensate for the bass generated by the aftermarket amplifiers and subs.
How Do I Install A Subwoofer In A Honda Accord?
In order to use an amp with a high-level input, either you need a LOC or you need an amplifier with a high-level input.
You will need the following:
- A kit for amplifying
- A box.
To connect to the amp using RCAs, you can connect to the speaker outputs. The correct wiring harness for your amp will be required if you decide to go high level. You can connect the battery’s + to the amp’s + (fused).
Lastly, run a grounded cable from the amplifier to the trunk floor. Be sure to remove all paint from the ground location. Avoid puncturing the gas tank. Operate the head unit from behind the remote.
Plug the amplifier into the subwoofer box. Voila, you now have subwoofers in your car. I recommend a high-level input amp with automatic turn-on if you haven’t yet purchased the amp. It makes life easier.
I answered your question in a very simplified way. I (or someone else) will be able to provide you with a more detailed answer if you have more detailed questions. You can, however, install a subwoofer in almost any car, and it is fairly straightforward to do so.
Find an Enclosure That Fits Snugly Inside Your Honda Accord’s Trunk
To install a subwoofer in your Honda Accord, you will first need to find an enclosure that fits snugly inside the trunk of your car. You can then locate installation instructions for your specific model online or from the manufacturer’s website.
Make sure you choose an enclosure that is compatible with your car and sound system before purchase. Once installed, be sure to adjust the bass levels and EQ settings on your audio system to get the perfect listening experience.
Finally, make use of spare speaker wire if needed so that you have enough cable length to reach from the woofer to the amplifier/speaker unit in your car.
Make Sure Your Amplifier and Speaker Are Compatible With Each Other
It is important to make sure your amplifier and speaker are compatible before you start the installation process. Make sure to measure the space where you want to install your subwoofer and compare it against the dimensions of your speaker.
Use caution when drilling into walls or floors as improper installation can damage both equipment and surroundings. You will also need an audio cable, power cord, mounting screws, a coaxial input for satellite radio/CDs, etc., and a ground wire in order to complete the installation process successfully.
Follow all safety guidelines while performing this task; otherwise, you may end up with damaged equipment or even injure yourself.
Set Up The Bass Level And Volume On Your Accord’s Audio System
To get the best bass and sound quality from your Accord’s audio system, you’ll first need to set the level and volume.
There are different ways to do this depending on what type of audio source you’re using: CD player, MP3 player, or satellite radio. Once you’ve adjusted the settings for each device, it’s time to connect the subwoofer.
Can you hook a subwoofer up to the factory radio?
If you’re looking to add some extra power and quality to your car audio system, you can consider investing in an amplifier and subwoofer set-up. It’s important to make sure that all of the wirings are done correctly in order for the system to work properly – especially if you’re using a factory stereo.
There are several different ways to connect your amplifier, subwoofer, and speakers together; it just depends on what works best for your specific situation. Be sure not to damage any components while hooking everything up – proper wire harnessing will save you time and hassle.
Can I just add a subwoofer to my car?
If you’re interested in adding a subwoofer to your car audio system, there are a variety of options available on the market. You’ll need to purchase an amplifier separately, but installation is usually not too difficult – provided that you have the necessary tools.
Beware of unlicensed or imported brands when choosing a subwoofer for your car; only use those approved by the authorities. Many car stereos already include an amplifier and subwoofer module, so all you need is to find one that fits your needs and budget. Be sure to properly label any newly installed equipment in order to avoid mix-ups down the road.
Next time, when you want to sub, just tap the rear speaker.
If you’re looking to install a subwoofer in your Honda Accord, there are a few things you’ll need to do first. You’ll need to remove the console panel and then locate the sound system box.
From there, you can access the amplifier and subwoofer. Once everything is installed, reconnect all of the wires and test out your new audio setup.