Those little black circular clips that hold the shock towers in place can be removed by pulling on the thin carpet on the bottom. The thin carpet on the bottom just lifts up, and the shock towers themselves are held in place by a thin carpet on the sides.
Follow these steps if you want to do it safely. After you unscrew the fixtures holding the liner in place, it is easy to remove and clean. You can remove your Honda Accord’s trunk liner as follows:
- Clear the trunk of your belongings first.
- Your trunk’s light fixtures and weather strip need to be removed. Now you should be able to see the edges of the carpet.
- Pull it up gently until you reach pins that resemble screws.
- To remove them from the carpet, gently pry them off with a flathead screwdriver. It’s important to keep the carpet pins safe because you’ll need them to replace the carpet.
- Once the carpet has been fully removed, continue pulling it off and removing pins.
- Reinstall the liner after washing it or purchasing a new one.
- You can remove the trunk floor instead of replacing the trunk liner if you have a Honda Accord from after 2008.
The only thing you have to do is remove the clips that hold the floor to the car and seats. Both are located by the weather strip, whereas the other is near the seat/trunk connection.
How To Remove Trunk Liner In Honda Accord?
Use a blunt object to pry up the carpet until it is fully released from the tack strip or adhesive. Gently pull on the loose end of the carpet, being careful not to damage any underlying flooring materials.
If there are pins in numerous places, use a pin remover tool to remove them one by one while avoiding pulling on neighboring fabrics and seams. If necessary, replace damaged parts before re-attaching the carpet to its backing sheet using either screws or nails; be sure to follow the manufacturer’s instructions for best results.
Finally, brush away any excess debris and dust after completing your repairs or replacements
Remove Pins From Carpet
Start by removing the trunk liner from your Honda Accord using a flathead screwdriver. Pry up on one side of the liner and pull it away from the car body to reveal the carpet below.
Use a pry bar to remove any pins that may be holding down the carpeting, then lift it off cleanly. Vacuum up all of the loose material and dirt before reinstalling your new flooring.- Be sure to read our guide on how to install carpets in your car for more tips.
Gently Pry Up And Pull Carpet Free
There are a couple of ways to remove the trunk liner from your Honda Accord. One method is to gently pry up and pull the carpet free using your hands. Another option is to use a flathead screwdriver to loosen screws that secure the liner in place, then pull it loose after it comes off easily.
If you have access to an HVAC professional, they may be able to dissolve or cut away any adhesive holding the liner in place so that it can be removed completely with less effort involved on your part. Be sure not to damage any trim along the way – removing trunk liners can be tricky and delicate work.
Remove Pins From Area Until It Is Fully Released
Honda Accord owners often find that the trunk liner needs to be removed for a variety of reasons- such as when the car is being serviced or when it’s time to sell the vehicle.
The procedure for removing pins from an area until it is fully released varies depending on the make and model of your Honda Accord but usually involves prying with a flat head screwdriver before pulling/lifting away from the edge of the trunk lid.
If you are having trouble releasing the pins, try using something blunt like needle nose pliers instead of nails in order to create more space between them and your trunk lid. Once all pins have been pulled/released, gently tug on the newly freed section of the trunk liner until it snaps into place – making sure not to damage any screws along the way.
Finally, store your Honda Accord trunk liner in a safe location so you can reattach it if needed in future years – just follow these simple steps again.
Replace Or Repair Damaged Parts
Replacing any damaged part is very important otherwise the system might not work as expected. If your trunk liner is damaged or torn, you can replace it yourself with a few simple tools. If the damage is more severe, you may need to repair it first.
Follow these steps for removal and replacement of the trunk liner in a Honda Accord: Make sure to read the owner’s manual carefully before starting any repairs on your car.
Don’t wait until something bad happens – take action now and protect your car’s interior.
If you are looking to remove the trunk liner in your Honda Accord, there are a few different methods that you can try. Depending on how difficult it is to remove the liner, one approach might be easier than another.
Ultimately, trying several different methods until you find one that works for you is always a good idea.