You need to recalibrate your TPMS each time you reinflate your tires, replace a tire, or rotate them so they work properly again. In other words, you’ll need to reset the tire pressure light.
You will need to drive between 30 and 65 mph for 30 minutes during the recalibration process. Afterward, your tire pressure monitoring system will automatically stop.
However, sometimes TPMS can malfunction, causing false alarms or failing to detect actual issues. In such cases, knowing how to reset your Honda tire pressure light can come in handy.
On Hondas, the button for the TPMS is located on the left side of the steering wheel. The warning light will blink twice after you press and hold the button. This should reset the tire pressure light on your Honda vehicle.
How Do You Reset The Tire Pressure Light On A Honda Accord & CR-V?
Does your Honda vehicle need its tire pressure monitoring system (TPMS) reset? Depending on what kind of technology is installed in your Honda and when you bought it, the instructions may differ. You can find your car’s instructions below.
TPMS Reset In Older Honda Vehicles
For Models With A TPMS Button
There is a TPMS button located on the left side of the steering wheel if your vehicle is equipped with one. The warning light should blink twice when you hold down the button.
For Models Without The Touchscreen Display
The Driver Information display can be accessed and used by using the steering wheel:
- Select SETTINGS from the vehicle’s screen
- Calibration of the TPMS should be selected
- Choose Calibrate
For Models With Steering Wheel Controls
- Click the MENU button
- Choose Customize Settings from the menu
- Select the calibration method for your TPMS
- Select the initialize option
- Check the YES box
- To exit, press the MENU key
How To Reset Tire Pressure Monitoring System In Newer Honda Vehicles
Models Without The Touchscreen Display
Entering selections in the Driver Information display using the steering wheel buttons:
- Select the Settings screen on the vehicle’s screen
- Select the calibration method for your TPMS
- Choose Calibrate
Models With Display Audio Touchscreen
- Select Settings from the home screen
- Choose a vehicle
- Select TPMS calibration
- Calibrate should be selected
What Causes The TPMS Light To Come On?
- The tires are compact.
- Mixed tire types and sizes. It is important to use tires of the same size and make
- As compared to when calibrated, the tires are loaded heavier and unevenly.
- Roads that are slippery or snowy.
- The system can be triggered by low ambient temperatures, for example.
- It is not calibrated yet. It usually takes 30 minutes of cumulative driving at speeds ranging from 30-60mph (48-97km/h)
- During calibration, the light may come on briefly if the ignition is turned on and the vehicle doesn’t move within 45 seconds. In this case, the process hasn’t been completed yet.
Final Words
Your vehicle’s TPMS may be malfunctioning if the warning light flashes every time you start it.
You might experience this if a tire or wheel has been incorrectly installed – stop by a Honda service center and they’ll find the problem and fix it!
Leave a Reply