The Honda Ridgeline is a popular mid-size pickup truck known for its reliability, versatility, and performance. If you’re a Ridgeline owner or considering purchasing one, it’s important to understand the bolt pattern of the wheels to ensure proper fitment when changing or upgrading your wheels.
The bolt pattern refers to the number of bolts on the wheel and the distance between them, and it plays a critical role in selecting the right wheels for your Ridgeline.
We will explore the Honda Ridgeline bolt pattern in detail, including what it is, how to measure it, and what wheel options are available for your vehicle.
List of Honda Ridgeline Models and Their Respective Bolt Patterns
Here is a comprehensive list of Honda Ridgeline models and their respective bolt patterns:
- 2005-2014 Honda Ridgeline: 5×120 bolt pattern, 64.1mm center bore
- 2017-2023 Honda Ridgeline: 5×120 bolt pattern, 64.1mm center bore
- 2006-2007 Honda Ridgeline 3.5L V6 5×120
- 2006-2007 Honda Ridgeline 3.5 V6 3.5L V6 5×120
- 2008-2014 Honda Ridgeline 3.5L V6 5×120
It’s important to note that while the bolt pattern is the same for the 2017-2023 models, the offset and wheel size may vary between trim levels.
Additionally, it’s always recommended to consult with a trusted mechanic or wheel specialist when selecting new wheels to ensure proper fitment and safety.
Here’s a table for the Honda Ridgeline bolt pattern
|Honda Ridgeline Model||Displacement||Bolt Pattern|
|2005 Honda Ridgeline||3.5L V6||Unknown bolt pattern, please consult with a trusted mechanic or wheel specialist.|
|2006-2007 Honda Ridgeline||3.5L V6||5×120|
|2006-2007 Honda Ridgeline 3.5 V6||3.5L V6||5×120|
|2008-2014 Honda Ridgeline||3.5L V6||5×120|
|2017-2023 Honda Ridgeline||3.5L V6||5×120|
Other Fitment Specs You Should Know
In addition to the bolt pattern, there are several other fitment specifications that you should be aware of when selecting new wheels for your Honda Ridgeline
The center bore is the diameter of the hole in the center of the wheel that fits over the hub of the vehicle. For the Honda Ridgeline, the center bore is 64.1mm.
The offset is the distance between the hub mounting surface and the centerline of the wheel. It can be positive, negative, or zero. The offset for the Honda Ridgeline may vary between trim levels, so it’s important to check your specific vehicle’s offset.
The wheel size refers to the diameter and width of the wheel. For the Honda Ridgeline, the stock wheel size is typically 17×8.0 inches, but it can vary between trim levels and model years.
The tire size refers to the width, aspect ratio, and diameter of the tire. It’s important to select a tire size that is compatible with your new wheels and that meets the manufacturer’s recommended specifications.
By considering these fitment specifications in addition to the bolt pattern, you can ensure that the new wheels you select for your Honda Ridgeline will fit properly and safely.
Honda Ridgeline Other Fitment Specs Per Generation
here’s a table for the other fitment specifications of the Honda Ridgeline per generation
|Generation||Years||Bolt Pattern||Center Bore||Offset||Wheel Size||Tire Size|
|First Generation||2005-2014||5×120||64.1mm||Varies by trim level||17×8.0 inches||245/65R17|
|Second Generation||2017-2023||5×120||64.1mm||Varies by trim level||18×8.0 or 18×8.5 inches||245/60R18 or 245/50R20|
Note that the above specifications are for reference only, and the exact specifications may vary between different models, trim levels, and model years.
It’s always recommended to consult with a trusted mechanic or wheel specialist to ensure proper fitment and safety when selecting new wheels for your Honda Ridgeline.
Why Knowing Blot Pattern is Important?
Knowing the bolt pattern of your vehicle is important because it determines which wheels are compatible and safe to use on your car. The bolt pattern is the number of bolt holes and the distance between them that attach the wheel to the hub of the car.
If the bolt pattern of the wheel does not match the bolt pattern of the hub, the wheel will not fit properly,
which can lead to a number of issues, such as vibrations, wheel wobbling, and even accidents. In addition, using wheels that do not match the bolt pattern of the hub can cause stress on the wheel studs and potentially damage the braking system.
Therefore, it’s important to always select wheels with the correct bolt pattern for your vehicle to ensure proper fitment and safety.
How to Measure the Honda Ridgeline Bolt Pattern?
Here are the steps to measure the bolt pattern for a Honda Ridgeline
Clean the Wheel Hub
Ensure that the wheel hub is free of any dirt or debris that may affect your measurements. Use a wire brush or a clean rag to remove any dirt or rust from the hub.
Count the Bolt Holes
Count the number of bolt holes on the hub. For most Honda Ridgeline models, there are five bolt holes.
Measure the Bolt Circle Diameter
Using a bolt pattern gauge or a tape measure, measure the diameter of a circle that passes through the center of each bolt hole. This will give you the bolt circle diameter (BCD) or bolt pattern. For a Honda Ridgeline, the bolt pattern is typically 5×120.
It’s important to note that some Honda Ridgeline models may have different bolt patterns, center bores, and offsets depending on the year, trim level, and specific model.
It’s always recommended to consult your vehicle’s owner’s manual or a trusted mechanic to confirm the bolt pattern and other fitment specifications before purchasing new wheels.
Additionally, if you are unsure about how to measure the bolt pattern or do not have the necessary tools, it’s recommended to consult a professional for assistance.
How to Tighten Honda Ridgeline Bolts?
Here’s a step-by-step guide on how to tighten the bolts on a Honda Ridgeline
Secure the Car
Make sure the car is on a level surface and set the parking brake. Use wheel chocks to prevent the car from moving.
Loosen the Lug Nuts
Use a lug wrench to loosen the lug nuts on the wheel that you want to tighten, but do not remove them yet.
Tighten the Bolts
Use a torque wrench to tighten the bolts to the recommended torque specification. The recommended torque specification for a Honda Ridgeline is typically 80-100 ft-lbs (108-135 Nm). Tighten the bolts in a star pattern, in increments, until they are all tightened to the correct torque specification.
Double-check the Torque
After tightening all the bolts, go back and double-check the torque on each bolt to ensure that they are all tightened to the correct specification.
Tighten the Lug Nuts
Once all the bolts are properly tightened, use the lug wrench to tighten the lug nuts in a star pattern, in increments, until they are snug.
Lower the Car
Remove the wheel chocks and carefully lower the car to the ground.
Re-torque the Lug Nuts
After driving for a short distance, re-check the torque on the lug nuts to ensure they are still properly tightened.
It’s important to use a torque wrench when tightening the bolts on a Honda Ridgeline, as over-tightening can cause damage to the wheel studs and under-tightening can lead to wheel wobbling or even detachment.
It’s also recommended to consult your vehicle’s owner’s manual or a trusted mechanic to ensure that you are using the correct torque specification and tightening sequence for your specific model and year of Honda Ridgeline.
Understanding the bolt pattern and other fitment specifications of your Honda Ridgeline is important for selecting compatible wheels and ensuring safe and proper fitment. It’s essential to measure the bolt pattern accurately and use the correct torque specification when tightening the bolts.
Failure to use the proper fitment can lead to issues like vibrations, wheel wobbling, and even accidents. If you’re unsure about measuring the bolt pattern or tightening the bolts on your Honda Ridgeline, it’s recommended to consult your vehicle’s owner’s manual or a trusted mechanic for assistance.
Following these guidelines will help you maintain your vehicle’s safety, performance, and overall appearance.
Check Other Honda Models Bolt Pattern –
Leave a Reply